verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke950 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$163.27 $170.77Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S

The AirTAC SAIJ40X950-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this specific SKU carries the -S option, it includes a built-in magnet for position sensing with AirTAC CMSE reed or DMSE electronic solid-state switches.

The -10 adjustment code provides a 940-950mm usable travel window, allowing you to fine-tune the retract end position by up to 10mm during commissioning. As a 950mm stroke approaches the 1200mm maximum standard stroke limit for this bore, the rear stopper screw lets you dial in the exact end-of-stroke without machining external stops. The adjuster acts purely as a travel stop and works in tandem with the 30mm variable air cushions at both ends to decelerate the load.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S Is Used

settings_input_component

Long-Reach Changeover

Dial in the 940-950mm retract position precisely when switching between product lengths on a long-stroke handling line.

tune

Commissioning Fine-Tune

Trim the final 10mm of travel during machine setup to perfect tooling alignment without adding bulky external stopper blocks.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring precise variable end-stops or product changeovers without swapping cylinders. At 950mm, the unsupported stroke length is significant, so an external guide is strongly recommended to prevent excessive side-loading on the 16mm rod and M12x1.25 rod thread. For load-holding without live air pressure, note that the rear adjuster is a stop and not a lock; you would need an external rod lock or a related SAIL pneumatic lock cylinder. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 40mm bore, 950mm stroke, 10mm adjustment, PT tapered port threads, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S FAQ

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 950mm nominal stroke by up to 10mm, creating a 940-950mm travel window. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X950-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.