
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 930 and 950 mm.
This extruded aluminum barrel design omits tie-rods and includes sensor grooves on both sides for flexible switch mounting. Because the rear adjuster acts solely as a mechanical stop to set deceleration, it will not hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Adjusts the retract stop within the 930-950 mm window to perfectly align product pushers during format size changes on a conveyor line.
Dials in the exact end-of-stroke position during setup without adding external stopper blocks or machining new hard stops.
Fine-tunes the tooling travel distance on the fly to accommodate different material thicknesses or part lengths.
Choose this adjustable-stroke model over a fixed SAI when you need variable end-position tuning during machine commissioning or product changeover without swapping the cylinder. If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa, while stepping up to a 50 mm bore provides 982 N.
With a 950 mm stroke, the 16 mm rod is highly susceptible to side-loading, so an external guide rail is strongly recommended to prevent premature wear. For ISO 15552 replacements, match the 40 mm bore, 950 mm stroke, 20 mm adjustment, PT port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. Note that a magnet is not specified, so CMSE or DMSE sensors cannot be used without modification.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it can deliver up to 128 kgf.
The external rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 930 to 950 mm, enabling precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.