
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 930-950 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch mounting.
Equipped with a -S magnet, this unit is fully compatible with AirTAC CMSE reed and DMSE electronic sensors. The rear adjustment screw acts as a travel stop for precise end-position tuning during commissioning, but it does not lock the load without live air pressure. It supports a standard mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 930-950mm travel window during product size transitions to set exact retraction points without mechanical rework.
Fine-tune the end-stop on long-stroke automated assembly lines to compensate for sensor variance or mechanical drift.
Adjust the rear stopper to alter the push-off distance for varying package sizes on a 40mm bore pneumatic conveyor system.
Choose this adjustable-stroke model when your setup requires precise end-stop tuning without swapping cylinders or adding external stops. If you need less force, the 32mm bore provides 402N at 0.5MPa; for heavier loads, the 50mm bore offers 982N. Because the 950mm stroke is long, an external guide is recommended to manage side loads and prevent rod deflection. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead. This SAIJ variant is dimensionally interchangeable per ISO 15552 and features a PT tapered port thread.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw allows you to shorten the 950mm nominal stroke by up to 20mm, giving a usable travel window of 930-950mm. This screw acts as a travel stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.