
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to a 920-950 mm window without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE position switches.
Because the nominal 950 mm stroke approaches the practical limits for this bore size, the robust 16 mm rod helps manage side loads, though an external guide is still recommended for long unsupported spans. This adjustable-stroke variant uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 920-950 mm travel window during product size transitions to set precise retract positions without swapping cylinders.
Use the rear adjuster to fine-tune the final end-of-stroke position during machine commissioning, compensating for mechanical tolerances.
Ideal for material handling tasks requiring a 950 mm nominal reach where exact positioning at the retract end must be calibrated on-site.
Choose this 40 mm bore adjustable cylinder when a machine design requires exact end-position calibration during commissioning or product changeover, providing a 920-950 mm travel window instead of a fixed 950 mm stroke. If your application needs less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa; if higher thrust is required, moving up to a 50 mm bore provides 1374 N. For load-holding without continuous air pressure, this cylinder is not a lock—consider an AirTAC SAIL or BSAI model instead. To match an ISO 15552 replacement, specify the PT tapered port thread, carbon steel rod, and your required mounting bracket.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the effective travel by up to 30 mm, creating a 920-950 mm usable stroke window. It is a travel stop for tuning end positions, not a lock, and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.