
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 910-950 mm window. It delivers 628 Newtons of pull force at 0.5 MPa and utilizes a G1/4 port with a 16 mm carbon steel rod. Threaded to M12x1.25, the rod provides a robust interface for standard loads.
This adjustable unit omits the FB, CA, CB, and CR mounting options, retaining a focused set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories. The rear stopper screw sets the retraction end position without requiring external physical stops, though it acts only as a travel limiter and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 910-950 mm retraction point during product size transitions without swapping cylinders or adding external stopper blocks.
Precisely set the end-of-travel position for long-reach pressing or handling tasks, using the rear adjuster to fine-tune the final contact point.
Establish variable end stops for long-travel conveyor diverters or gating mechanisms, ensuring accurate product placement.
Choose this 40 mm bore when an application requires precise end-position tuning during commissioning or product changeover, offering a 910-950 mm travel window. If you need higher force, stepping up to the 50 mm bore yields 825 N of pull at 0.5 MPa, while dropping to a 32 mm bore reduces it to 345 N. Because the 950 mm stroke is quite long, an external guide is strongly recommended to prevent excessive side-loading on the piston rod.
For exact ISO 15552 replacement matching, verify the 40 mm bore, 950 mm stroke, 40 mm adjustment, PT tapered port thread, and your required mounting accessory. Note that a plain SAIJ does not hold position without live air; for true load-holding, consider the SAIL or BSAI series instead.
Quick checklist
The maximum thrust is 128 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke by up to 40 mm, creating a usable travel window of 910-950 mm. It requires live air pressure to hold the load, as the adjuster only sets the travel end and does not function as a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.