verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke950 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$163.27 $170.77Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S

The AirTAC SAIJ40X950-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 910 to 950 mm usable travel window, allowing you to dial back the 950 mm nominal stroke by up to 40 mm during commissioning.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE and DMSE switches. Because this is a 950 mm stroke, the 16 mm carbon steel rod and M12x1.25 thread require external guiding to prevent excessive side-load deflection. The rear adjuster acts strictly as a travel stop for end-position tuning and does not hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S Is Used

conveyor_belt

Product Changeover Stops

Quickly modify the extended end-stop position on a packaging line when switching between different package lengths without replacing hardware.

precision_manufacturing

Commissioning Fine-Tuning

Dial in the exact 910 to 950 mm travel distance during initial machine setup to perfectly time a push-off operation.

view_module

Adjustable Ejector

Vary the ejection stroke on an assembly line to accommodate parts of slightly different heights without repositioning the cylinder.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S the Right Cylinder?

Choose this adjustable-stroke model over a fixed SAI when you need variable end-stops for product changeovers or fine-tuning at machine setup without swapping the cylinder. If your application requires less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa; if you need more clamping power, a 50 mm bore provides 1374 N. To replace this ISO 15552 cylinder, match the 40 mm bore, 950 mm stroke, 40 mm adjustment, PT tapered port thread, and the -S magnet option.

For any stroke of 950 mm, always use an external guide to support the rod and prevent binding. Remember that the rear adjuster and air cushions only decelerate the travel end; they do not function as a lock. For true load-holding without live air, select an SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S FAQ

The rear adjuster acts as an external stopper that lets you shorten the effective travel from the 950 mm nominal stroke down to 910 mm. This allows fine-tuning of the end position during setup without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X950-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.