
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 50 mm. This creates a precise 900-950 mm usable window, letting you dial in the exact end position during commissioning without swapping out the actuator.
Because the 950 mm stroke is long relative to the 40 mm bore, the M12x1.25 rod thread and piston rod need careful alignment to avoid excessive side loading. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches if a magnet is specified later. The rear adjuster acts purely as a mechanical stop for deceleration alongside the standard air cushions, meaning it will not hold a load safely without continuous live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt automated machinery to varying product lengths by shifting the end position within the 900-950 mm window without changing the cylinder.
Dial in the exact end-of-stroke position during machine setup to perfect alignment, avoiding the need to add external mechanical stops.
Handle long-travel diverting or pushing tasks on a conveyor where a 950 mm stroke is necessary but the final stopping point requires on-site adjustment.
Choose this 40 mm bore when you need more thrust than a 32 mm cylinder (which provides 402 N at 0.5 MPa) but want a more compact footprint than a 50 mm option (which delivers 982 N). The adjustable stroke is highly beneficial for product changeovers on a line, allowing the end-stop to be shifted within the 900-950 mm range rather than physically replacing a fixed-stroke SAI cylinder. For an exact ISO 15552 replacement, match the 40 mm bore, 950 mm stroke, PT tapered port thread, carbon steel rod, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Given the 950 mm stroke length, an external guide is strongly recommended to support the load and prevent rod binding. If your application requires the load to be held in place without constant air pressure, note that this adjuster is not a lock; you should explore an AirTAC SAIL pneumatic lock cylinder or an external rod lock instead.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the 950 mm nominal stroke by up to 50 mm. This provides an effective adjustable travel window of 900 to 950 mm for fine-tuning the retract position.
At 0.7 MPa, the push force increases to 879 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.