
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 875 to 950 mm, allowing you to dial back the nominal 950 mm stroke by up to 75 mm during commissioning.
This extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. The rear screw acts purely as a travel stop for end-position tuning, not a load-holding lock. For position retention without live air pressure, consider an external pilot-operated check valve or the related SAIL lock cylinder.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract position within the 875-950 mm window to perfectly align long-stroke parts without adding external mechanical stops.
Quickly adjust the stroke by up to 75 mm when switching between product sizes on a line, reducing downtime and avoiding cylinder replacement.
Use the 950 mm travel to push or transfer items across a conveyor, relying on the rear stop to set the precise resting distance.
The 75 mm adjustment range is ideal for machinery requiring variable retract end-stops during product changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder. Operating speed ranges from 30 to 800 mm/s.
When replacing an ISO 15552 cylinder, match the 950 mm stroke, 75 mm adjustment, PT G1/4 port, and mounting choice. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Because the stroke is 950 mm, an external guide is recommended to prevent excessive rod side-loading on unsupported loads.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw lets you shorten the effective stroke from 950 mm down to 875 mm. It functions as a physical stop to set the end position, but it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.