
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X950-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 950mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X950-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 950 mm nominal stroke by up to 75 mm. This creates an 875-950 mm usable travel window, enabling precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
This variant includes a standard magnet for position sensing with AirTAC CMSE reed and DMSE solid-state switches. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod has an M12x1.25 thread. Because the 950 mm stroke is long, an external guide rail is recommended to handle side loads and prevent rod deflection.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X950-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 875-950 mm travel needed to divert varying package sizes on a sorting line without physically replacing the actuator.
Fine-tune the retract end-position during product family transitions to accommodate new lengths, keeping downtime to a minimum.
Use the 950 mm stroke for extended reach in pressing or forming stations, adjusting the final 75 mm to calibrate the tooling contact point.
If you need higher thrust, stepping up to the 50 mm bore yields 982 N at 0.5 MPa. The rear adjuster acts purely as a travel stop and does not lock the load; for true position holding without live air pressure, select a SAIL pneumatic-lock or BSAI clamp-lock cylinder.
As an ISO 15552 interchangeable cylinder, it matches standard mounting dimensions with a PT tapered port. The available mounting set is reduced to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. The -S magnet enables direct sensor installation for automated feedback.
Quick checklist
It can operate at pressures up to 1.0 MPa.
The rear adjuster screw lets you shorten the effective travel from 950 mm down to as little as 875 mm. This mechanism works as an end-position stop for tuning and relies on the air cushion for deceleration; it does not lock the load in place without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.