
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X180-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X180-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down to 130 mm from the 180 mm nominal stroke. This 50 mm adjustment window is ideal for product changeovers, letting you dial in the retract end-position without swapping hardware or adding external stops.
Built with a carbon steel piston rod and an extruded aluminum barrel, this cylinder omits the FB, CA, CB, and CR mounting styles, offering a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. It features a G3/8 PT port, an M16x1.5 rod thread, and variable air cushions at both ends. Note that the rear adjuster acts only as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X180-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reposition the retract end-stop across a 130-180 mm window to handle varying package lengths on a packaging line without changing cylinders.
Fine-tune the final end-position during commissioning to achieve precise mechanical alignment, absorbing minor variances in machine framing.
Adjust the stroke on the fly for pressing or forming applications that require slight depth variations between production batches.
The generous 50 mm adjustment range is perfect for lines running mixed product sizes, allowing rapid end-stop tuning during commissioning versus a fixed-stroke SAI cylinder. If your application requires the load to be held mechanically without continuous air pressure, consider the SAIL or BSAI locking cylinder lines instead.
When replacing an ISO 15552 cylinder, match the 63 mm bore, 180 mm stroke, 50 mm adjustment, G3/8 PT port, and your required mounting interface. Because the stroke is 180 mm, side-loading is minimal, but always ensure the M16x1.5 rod thread is properly coupled to avoid binding. A magnet is not specified for this configuration, so CMSE or DMSE sensors cannot be used without modification.
Quick checklist
At 0.7 MPa, the push force increases to 2182 N.
The rear adjuster acts as an external stop that trims the effective stroke back by up to 50 mm. This creates a usable travel window of 130 to 180 mm, allowing you to shorten the retract distance without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.