verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S

The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke225 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$126.52 $134.02Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ63 stroke, mounting and version on one page All SAIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S

The AirTAC SAIJ63X225-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 215-225 mm usable travel window, letting you dial back the 225 mm nominal stroke by up to 10 mm during commissioning. Delivering 1559 N pull force at 0.5 MPa, it handles robust actuation tasks.

This bore uses a G3/8 port and an M16x1.5 rod thread to manage side loads effectively, though long unsupported strokes still require an external guide. The -S variant includes a magnet for AirTAC CMSE reed and DMSE solid-state sensors, fitting neatly into the dual-side sensor grooves of the extruded aluminum barrel.

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S Technical Specifications

ModelAirtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke225 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×225Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S Is Used

tune

Machine Changeover

Dial in the 215-225 mm travel window during product size changes without swapping cylinders or bolting on external stops.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end-stop at commissioning to absorb mechanical tolerances and achieve precise clamping.

factory

Automated Assembly

Actuate assembly tooling with 1559 N pull force while using the rear adjuster to set exact travel limits.

Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S the Right Cylinder?

Choose this 63 mm bore when you need 1559 N pull force at 0.5 MPa and prefer stepping up from the 50 mm bore (982 N pull) for higher work demands. An adjustable stroke is ideal for product changeovers, allowing you to fine-tune the end position without swapping the cylinder or adding external stops. For load-holding without live air, select the SAIL or BSAI series instead, as the SAIJ rear adjuster is a travel stop, not a lock.

To match this ISO 15552 cylinder for a replacement, verify the 63 mm bore, 225 mm stroke, 10 mm adjustment, PT tapered port thread, and the -S magnet. It supports the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is 225 mm, ensure external guiding for heavy loads to prevent rod side-loading damage.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S FAQ

At the maximum operating pressure of 1.0 MPa, it delivers up to 318 kgf.

The rear adjuster acts as a mechanical stop that lets you shorten the 225 mm nominal stroke by up to 10 mm, creating a 215-225 mm usable travel window. It only sets the travel end and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X225-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ63X225-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.