
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X230-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 230mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X230-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 20mm adjustment range, allowing you to fine-tune the effective travel window between 210 and 230mm during commissioning without swapping the cylinder or adding external stops.
This model uses a G3/8 port and M16x1.5 rod thread, offering robust resistance to side loads. It supports speeds of 30-800mm/s and features variable air cushions at both ends to decelerate the piston. For load-holding applications requiring position retention without live air pressure, consider the SAIL or BSAI series, as the rear adjuster functions strictly as a travel stop, not a brake.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X230-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 210-230mm travel window during product size changes without physically replacing the cylinder or adding external mechanical stops.
Set precise retract positions on a packaging line to accommodate different carton sizes, using the rear screw to trim the stroke up to 20mm.
If your process demands less force, the 50mm bore offers 1374N; if you need more, the 80mm bore provides 3518N. The adjustable stroke is ideal for product changeovers on a line, letting you dial in the exact 210-230mm travel window. Because the stroke is 230mm, an external guide is recommended to prevent excessive rod wear and premature seal failure.
To replace an ISO 15552 cylinder, match the 63mm bore, 230mm nominal stroke, 20mm adjustment range, PT tapered port thread, and the -S magnet for CMSE/DMSE sensors. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
Quick checklist
It can deliver up to 318kgf at the maximum 1.0MPa pressure.
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke by up to 20mm. This creates a usable travel window of 210 to 230mm, allowing precise end-position tuning at commissioning. It is a stop, not a lock, and cannot hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.