
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X275-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 275mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X275-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 265-275 mm. It delivers 1559 N of pull force at 0.5 MPa and features a carbon steel rod with an M16x1.5 thread. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic sensors.
This adjustable-stroke design allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air. It retains standard ISO 15552 mounting dimensions and uses a G3/8 port.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X275-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 265-275 mm retract position during machine commissioning to perfect product placement without machining external stoppers.
Quickly adjust the rear stroke screw by up to 10 mm to accommodate slight variations in part dimensions on a packaging line.
Apply up to 1559 N of pull force at 0.5 MPa while using the rear stop to prevent over-travel during delicate component seating.
Choose this 63 mm bore cylinder when you need 1559 N pull force at 0.5 MPa with fine 10 mm rear adjustment. If your application requires less force, the 50 mm bore offers 825 N pull; if you need more, the 80 mm bore provides 2268 N. The adjustable stroke is ideal for product changeovers, whereas a fixed SAI cylinder suits static endpoints.
For an exact ISO 15552 replacement, match the 63 mm bore, 275 mm stroke, 10 mm adjustment, PT port thread, and -S magnet. Since the stroke is 275 mm, ensure external guides support the load to prevent excessive side-loading on the rod. For load-holding without live pressure, use a SAIL or BSAI cylinder instead.
Quick checklist
The maximum thrust is 318 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop, allowing you to shorten the 275 mm nominal stroke by up to 10 mm, creating a 265-275 mm travel window. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.