verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S

The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 300mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke300 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$136.08 $143.58Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ63 stroke, mounting and version on one page All SAIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S

The AirTAC SAIJ63X300-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 200-300 mm usable travel window by allowing you to dial back the 300 mm nominal stroke by up to 100 mm. It delivers 1559 N of pull force at 0.5 MPa and uses a G3/8 port.

This unit includes a standard carbon steel rod and a built-in magnet (-S) compatible with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and the mounting set omits FB, CA, CB, and CR options, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S Technical Specifications

ModelAirtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke300 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S Is Used

tune

Product Changeovers

Dial in the 200-300 mm travel window during line changeovers to accommodate different product lengths without physically replacing the cylinder.

precision_manufacturing

Machine Setup

Fine-tune the retract end-position during commissioning to dial in exact mechanical stops, eliminating the need to bolt on external hard stops.

settings_input_component

Variable End Stops

Adjust the effective stroke on the fly for automated machinery requiring flexible positioning limits within a 100 mm range.

Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S the Right Cylinder?

Choose this 63 mm bore when you need 1559 N pull force at 0.5 MPa, stepping up from a 50 mm bore (982 N pull) for heavier fixtures. The 100 mm adjustment window is ideal for product changeovers, letting you fine-tune end positions at commissioning without swapping cylinders or adding external stops. For strokes of 300 mm or more, use an external guide to support the load and minimize side-load wear on the M16x1.5 rod thread.

The rear adjuster acts strictly as a travel stop for end-position tuning, not a lock. It cannot hold a load without live air pressure; for true load-holding, select an SAIL air-released lock, a BSAI clamp-lock, or an external rod lock. This model is dimensionally interchangeable per ISO 15552 and uses a PT tapered port thread.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S FAQ

The maximum operating pressure is 1.0 MPa.

The rear adjuster acts as a stopper that lets you shorten the 300 mm nominal stroke by up to 100 mm, creating a 200-300 mm usable travel window. It only sets the travel end and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X300-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ63X300-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.