
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X650-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 650mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X650-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 600 to 650 mm. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position feedback.
The integrated rear adjusting screw allows you to dial back the stroke by up to 50 mm during commissioning without adding external stops. The adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X650-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 600-650 mm end position during product family transitions without physically replacing the cylinder or bolting on external stopper blocks.
Dial in the exact retraction point for varying package sizes on a packaging line, using the rear screw to shorten the effective stroke by up to 50 mm.
Choose this 63 mm bore when you need more force than the 50 mm series (982 N at 0.5 MPa) but less bulk than the 80 mm (2513 N at 0.5 MPa). The adjustable stroke is ideal for product changeovers on a line, letting you fine-tune the 600-650 mm travel window on the fly instead of swapping cylinders. Because the stroke is 650 mm, the M16x1.5 rod is highly susceptible to side-loading; an external guide rail is strongly recommended to prevent premature seal wear.
When ordering a replacement, verify the 63 mm bore, 650 mm nominal stroke, 50 mm adjustment range, PT tapered G3/8 port, and the -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. The -S magnet pairs correctly with AirTAC CMSE reed switches and DMSE solid-state sensors.
Quick checklist
It can deliver up to 318 kgf at its maximum 1.0 MPa pressure rating.
The rear adjuster screw lets you shorten the nominal 650 mm stroke down to 600 mm. This creates a 600-650 mm adjustable travel window for fine-tuning end positions at commissioning. The adjuster acts only as a mechanical stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.