
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X900-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 900mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X900-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 63 mm bore and a 900 mm nominal stroke, yielding a usable travel window of 800 to 900 mm. This built-in adjustability allows you to fine-tune the retract end position during commissioning or product changeovers without adding external stops.
This unit includes a magnetic piston (-S) for position sensing and uses a PT tapered port thread. The extruded aluminum barrel incorporates sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. A variable air cushion at both ends manages deceleration, while the carbon steel rod and M16x1.5 rod thread provide a robust interface for your mechanical linkage.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X900-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 800 to 900 mm retract position precisely when switching a production line to accommodate different material lengths or packaging dimensions.
Pushes or sorts items across a wide conveyor belt using the full 900 mm travel, with the rear stopper allowing quick tweaks to the diverting endpoint.
An adjustable stroke is ideal for machines that process varying product sizes, letting you dial in the exact 800 to 900 mm end-stop on the fly instead of swapping cylinders. If you need to hold a load in place without continuous live air pressure, note that this rear adjuster acts only as a travel stop, not a lock; you should explore an AirTAC SAIL or BSAI series cylinder instead.
Because the 900 mm stroke is long, the M16x1.5 rod and internal guides cannot compensate for excessive side loads. Always pair this cylinder with an external linear guide to prevent premature seal wear. For a true ISO 15552 dimensional replacement, match the 63 mm bore, 900 mm stroke, 100 mm adjustment, G3/8 port, PT thread, and -S magnet, selecting from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting brackets.
Quick checklist
If you increase pressure to 0.7 MPa, the push force rises to 2182 N.
The rear adjuster screw lets you shorten the effective stroke by up to 100 mm from the nominal 900 mm, giving you an adjustable travel window of 800 to 900 mm. This stopper only sets the end position; it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.