Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 130mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke130 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S
The AirTAC SAIJ80X130-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 120-130 mm usable travel window. The -S magnet option enables position sensing with AirTAC CMSE reed or DMSE electronic solid-state switches.
This model uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. The rear adjuster acts purely as a mechanical stop to trim the retract end-position, so it will not hold the load without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S Is Used
End-Position Tuning
Dial in the exact retract distance within a 120-130 mm window during machine setup without adding external mechanical stops.
Product Changeover
Quickly adjust the stroke end-stop on packaging lines when switching between product sizes, saving retooling time.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S the Right Cylinder?
The 10 mm adjustment range is ideal for fine-tuning the end stop during machine commissioning or product changeover, avoiding the need to physically swap out a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 80 mm bore, 130 mm stroke, 10 mm adjuster, PT G3/8 port, and -S magnet. Because the 130 mm stroke is relatively short, standard side-load risks are low, but external guides are still recommended for heavy lateral loads. Note that for load-holding without continuous air pressure, you must use a SAIL pneumatic lock, a BSAI clamp-lock, or an external rod lock, as the SAIJ adjuster is only a travel stop.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S FAQ
The rear adjusting screw acts as an external stopper that can shorten the effective stroke by up to 10 mm, creating a usable travel window of 120-130 mm. It sets the travel end but does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.