Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX160-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S
The AirTAC SAIJ80X160-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, providing a usable travel window of 130 to 160 mm. The external stopper allows precise end-position tuning during commissioning without adding external stops.
This adjustable-stroke model includes a magnetic piston for position sensing with CMSE reed or DMSE electronic switches. The rear adjuster acts strictly as a travel stop to set deceleration, not a lock, meaning it will not hold a load without live air pressure. For true load-holding, consider the SAIL or BSAI series.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S Is Used
Product Changeover
Dial in the exact 130-160 mm end position during line changeovers without swapping out the entire cylinder.
Commissioning Tuning
Fine-tune the retract stroke end-point on-site to perfect machine timing and avoid adding external stops.
Variable End Stops
Adjust the travel window on automated assembly lines to handle slight variations in incoming part sizes.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S the Right Cylinder?
The 30 mm adjustment window is ideal for machine setups requiring variable end stops or product changeovers, offering more flexibility than a fixed-stroke SAI cylinder. To match an ISO 15552 replacement, verify the 80 mm bore, 160 mm stroke, 30 mm adjustment, PT G3/8 port, and the -S magnet.
Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. With a 160 mm stroke, side loads are minimal, but always ensure proper guiding for heavy loads. Note that the SAIJ mounting set omits FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S FAQ
The rear adjuster screw shortens the effective stroke by up to 30 mm, giving a usable travel window of 130 to 160 mm. It acts as a physical stop to tune the end position and does not lock the load without live air.
At 0.7 MPa, the push force increases to 3518 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX160-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.