Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX190-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 190mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke190 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S
The AirTAC SAIJ80X190-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 140-190 mm usable travel window.
This variant includes a SUS420J2 stainless steel rod for improved corrosion resistance and a -S magnet for position sensing. It uses PT tapered ports and retains the standard extruded aluminum barrel with dual sensor grooves, supporting AirTAC CMSE reed and DMSE electronic switches.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S Is Used
Product Changeovers
Quickly reconfigure the 140-190 mm travel window on packaging lines without changing the cylinder, minimizing downtime when switching package sizes.
End-Position Tuning
Fine-tune the retract stop during machine commissioning to achieve precise mechanical alignment without adding external stops.
Variable End Stops
Ideal for assembly stations requiring flexible positioning limits, using the rear screw to set the exact 2513 N retraction endpoint.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S the Right Cylinder?
The 50 mm adjustment range is ideal for machines requiring frequent product-size changeovers, replacing the need to swap out fixed-stroke SAI cylinders. For load-holding without live air pressure, select a SAIL or BSAI cylinder instead, as the rear adjuster here acts only as a travel stop.
As an ISO 15552 replacement, verify the 80 mm bore, 190 mm nominal stroke, PT port threads, and -S magnet. Because the stroke is under 300 mm, side-load stress is manageable, but always ensure the M20x1.5 rod thread is properly aligned with your external guide to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S FAQ
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster allows you to shorten the 190 mm nominal stroke by up to 50 mm, creating a 140-190 mm usable travel window. It functions as a mechanical stop and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX190-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.