Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX195-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 195mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke195 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S
The AirTAC SAIJ80X195-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 185 to 195 mm. The barrel features an extruded aluminum design with sensor grooves on both sides, and the rod is constructed from SUS420J2 stainless steel for enhanced corrosion resistance.
This model includes a -S magnet for position sensing and is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjustment screw allows you to fine-tune the retract end position at commissioning without adding external stops. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S Is Used
End-Position Tuning
Dial in the exact retract distance within the 185-195 mm window during machine commissioning to perfect part seating without external stopper blocks.
Product Changeover
Quickly adapt the stroke end-stop on packaging lines when switching between different product sizes, saving downtime on the floor.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S the Right Cylinder?
The 10 mm adjustment range is ideal for product-size changeovers on a line, letting you dial in the exact 185-195 mm travel without swapping the cylinder. If your force requirements are lower, stepping down to a 63 mm bore yields 2805 N at 0.9 MPa. Because the stroke is 195 mm, an external guide is recommended to manage side loads on the M20x1.5 rod.
The SAIJ80X195-10-S is dimensionally interchangeable per ISO 15552 with equivalent profile cylinders. To match this configuration, specify an 80 mm bore, 195 mm stroke, 10 mm adjustment, PT tapered port threads, SUS420J2 stainless steel rod, and a -S magnet. Keep in mind the rear adjuster acts as a travel stop, not a lock; the cylinder will not hold a load without live air pressure. For true load-holding, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S FAQ
It can deliver a maximum force of 513 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective stroke back by up to 10 mm, creating a 185 to 195 mm travel window. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX195-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.