Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX230-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke230 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10
The AirTAC SAIJ80X230-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 230 mm stroke that can be fine-tuned down by up to 10 mm, creating a precise 220-230 mm usable travel window without requiring external stops.
This unit uses a SUS420J2 stainless steel rod for enhanced corrosion resistance and features PT tapered port threads with a G3/8 connection. The extruded aluminum barrel includes dual sensor grooves, allowing you to add CMSE or DMSE switches later. The rear adjuster acts purely as a travel stop for end-position tuning, not a load-holding lock.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10 Is Used
Machine Changeover
Dial in the 220-230 mm travel window during product size changes to set new end positions rapidly without changing the cylinder.
Assembly Calibration
Fine-tune the retract end-stop during commissioning to achieve precise 80 mm bore clamping forces without adding external stoppers.
Diverting Mechanisms
Adjust the stroke by up to 10 mm on the fly to perfect the diverting position for varying package sizes on a packaging line.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10 the Right Cylinder?
The adjustable 220-230 mm window is ideal for machine setups needing minor end-position calibration during commissioning or product changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder.
For a direct ISO 15552 replacement, match the 80 mm bore, 230 mm stroke, 10 mm adjustment range, PT G3/8 ports, and your required mounting style. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 230 mm stroke is relatively long, ensure external guides support the load to prevent excessive rod side-loading. If the machine requires the load to be held without live air pressure, use a SAIL or BSAI cylinder instead of relying on this adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10 FAQ
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 230 mm down to 220 mm. This stopper mechanically limits the retract stroke for fine-tuning at commissioning, but it does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX230-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.