Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke110 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10
The AirTAC SAIJ80X110-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel by up to 10 mm. This creates a usable 100-110 mm stroke window, allowing precise end-position tuning during commissioning without adding external stops.
This variant features a SUS304 stainless steel rod for superior corrosion resistance and includes PT tapered port threads (G3/8). The extruded aluminum barrel integrates sensor grooves on both sides, and because no magnet is specified, position sensing requires external reed or solid-state switches mounted in those tracks rather than internal Hall sensors.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10 Is Used
Product Changeover
Dial in the 100-110 mm stroke window during packaging line format changes to accommodate varying carton sizes without swapping cylinders.
End-Stop Tuning
Fine-tune the retract position during machine setup to align tooling precisely, absorbing mechanical tolerances without external shims.
Assembly Actuation
Provide 2513 N of pressing force at 0.5 MPa for joining components, using the rear stopper to prevent over-travel and crushing.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10 the Right Cylinder?
If your process demands less force, stepping down to a 63 mm bore yields 1559 N, while moving up to a 100 mm bore provides 3927 N. The 10 mm rear adjustment screw is ideal for product changeovers, letting operators dial in the exact end-of-stroke position quickly.
For an exact ISO 15552 replacement, match the 80 mm bore, 110 mm stroke, 10 mm adjustment range, PT G3/8 port, and SUS304 rod material. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10 FAQ
A rear adjusting screw allows you to shorten the nominal 110 mm stroke by up to 10 mm, providing a usable travel window of 100-110 mm. The adjuster acts as a mechanical stop to fine-tune the end position, but it does not lock the load or hold position without continuous air pressure.
If operated at 0.9 MPa, the push force increases to 4523 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.