Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX110-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke110 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20
The AirTAC SAIJ80X110-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 90-110 mm usable travel window, allowing you to dial back the 110 mm nominal stroke by up to 20 mm during commissioning.
This model features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads with a G3/8 connection. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet, meaning position sensing via CMSE or DMSE switches is not supported without modification.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20 Is Used
Machine Changeover
Quickly adjust the 90-110 mm travel window during product size changes without swapping the cylinder or repositioning hard stops.
End-Position Tuning
Fine-tune the retract stroke by up to 20 mm at commissioning to perfect the seating of 2513 N clamping forces.
Assembly Line Calibration
Dial in the exact end-stop on automated assembly machinery, leveraging the G3/8 pneumatic supply for robust actuation.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20 the Right Cylinder?
The adjustable stroke is perfect for product changeovers, letting you fine-tune the retract end position without adding external stops. For fixed travel needs, the standard SAI series is a simpler alternative.
Since the stroke is 110 mm, side-load risks are moderate, but always ensure adequate external guiding for heavy loads. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. This unit is dimensionally interchangeable with ISO 15552 cylinders and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20 FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a 90-110 mm usable travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.