Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX110-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke110 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S
The AirTAC SAIJ80X110-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables seamless position detection with AirTAC CMSE reed or DMSE electronic solid-state switches.
This specific SKU provides a nominal 110mm stroke that can be dialed back by up to 30mm, creating an 80-110mm usable travel window for precise end-position tuning. It features a SUS304 stainless steel rod for superior corrosion resistance and utilizes PT tapered port threads (G3/8). The rear adjuster acts purely as a mechanical stop to fine-tune deceleration and position, meaning it does not hold the load without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S Is Used
Product Changeover
Dial in the 80-110mm travel window during format size changes on a packaging line, using the rear screw to set new end positions rapidly without mechanical rework.
Variable End Stops
Adjust the retract position on the fly for automated assembly equipment, utilizing the SUS304 rod for durability in mildly corrosive industrial environments.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S the Right Cylinder?
The 30mm adjustment range is ideal for machine setups requiring product-size changeovers without swapping the entire actuator. To replace an ISO 15552 cylinder, match the 80mm bore, 110mm stroke, 30mm adjustment, PT G3/8 port, and -S magnet. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the stroke is 110mm, side-load risks are minimal, but always ensure the load is guided to prevent binding. If your process requires the cylinder to hold its position securely without continuous live air, the SAIJ adjuster will not function as a lock; instead, consider the SAIL air-released lock or BSAI clamp-lock cylinder series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S FAQ
At 0.7 MPa, the push force increases to 3518N.
The rear mechanical stopper allows you to shorten the 110mm nominal stroke by up to 30mm, providing an adjustable travel window between 80mm and 110mm. This stopper sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX110-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.