
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX125-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 125mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X125-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the retract end-position. With a 125 mm nominal stroke and a 50 mm adjustment range, the usable travel window spans 75 to 125 mm.
Equipped with a SUS304 stainless steel rod, this version is ideal for environments where corrosion resistance is paramount. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. It features PT tapered port threads (G3/8) and variable air cushions at both ends to manage impact deceleration.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX125-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 75 and 125 mm during commissioning to accommodate different material thicknesses without adding external mechanical stops.
Quickly adjust the stroke on packaging or sorting lines when switching between product formats, reducing downtime and eliminating the need to swap cylinders.
Leverage the SUS304 stainless steel rod and 4523 N peak thrust for heavy-duty actuation in washdown or mildly corrosive industrial environments.
Choose this 80 mm bore when your application requires pushing forces between 2513 N (at 0.5 MPa) and 4523 N (at 0.9 MPa). If you need less force, the 63 mm bore offers 1559 N at 0.5 MPa; if you require significantly higher thrust, stepping up to the 100 mm bore provides 3927 N at 0.5 MPa. The adjustable stroke is highly beneficial for machine setups requiring variable end-stops or rapid product-size changeovers without physically swapping out the cylinder body.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 125 mm stroke, 50 mm adjustment, PT G3/8 port, and the -S magnet requirement. The available mounting interface set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster acts only as a travel stop for commissioning fine-tuning; it does not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series.
Quick checklist
At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
The rear adjuster screw lets you shorten the effective stroke by up to 50 mm, creating a usable travel window of 75 to 125 mm. This allows precise end-position tuning at commissioning, though the adjuster functions as a stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.