Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX140-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 140mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke140 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100
The AirTAC SAIJ80X140-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.
Equipped with a SUS304 stainless steel rod and PT tapered ports, this unit omits the FB, CA, CB, and CR mounts, utilizing a focused set of SAIJ attachments (Basic, FA, LB, TC, FTC, TCM1, TCM2). The rear adjuster acts purely as a travel stop for end-position tuning, meaning it will not hold a load without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100 Is Used
Product Changeovers
Dial in the exact end-position for new packaging formats using the 40-140mm travel window, eliminating the need to physically swap cylinders during line transitions.
Variable End Stops
Fine-tune the retract distance on the fly for multi-stage machining operations, relying on the rear stopper to set precise physical limits.
Machine Setup
Perfect the final positioning of a 2513N press motion during commissioning without fabricating custom external spacers or shims.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100 the Right Cylinder?
The generous 100mm adjustment window is ideal for adapting a single machine to multiple part sizes on the fly.
Because the 140mm stroke is relatively short, side-load risks are minimal, but the 25mm rod and M20x1.5 thread still provide excellent rigidity. For load-holding requirements without continuous air pressure, this cylinder is insufficient; you should specify an AirTAC SAIL or BSAI locking cylinder instead. This SKU is dimensionally interchangeable per ISO 15552 and lacks the -S magnet option, so it cannot host CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100 FAQ
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm, creating a usable travel window between 40mm and 140mm. This stopper only sets the end position and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX140-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.