
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX155-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X155-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down by up to 50 mm, creating a precise 105 to 155 mm usable window.
This variant is equipped with a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The rear screw acts purely as a mechanical stop to set the retract position, meaning it does not hold the load dynamically without live air pressure. For load-holding requirements without continuous air, an external rod lock or related types like SAIL or BSAI are required.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX155-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 105-155 mm travel window during line format changes to accommodate different package sizes without swapping hardware.
Fine-tune the retract end-position during commissioning to achieve exact mechanical alignment without adding external stopper blocks.
Adjust the rear stopper screw on the fly to alter the push-off distance for diverter mechanisms handling mixed product loads.
If your setup only needs fixed travel and a lower force, stepping down to a 63 mm bore provides 1559 N. The integrated adjuster allows you to dial in the exact 105-155 mm stroke on the fly, which is far more efficient than machining external stops or buying multiple fixed-stroke SAI cylinders.
When matching ISO 15552 replacements, verify the 80 mm bore, 155 mm nominal stroke, 50 mm adjustment range, PT port threads, and the SUS304 rod material. Note that this cylinder lacks a magnet, so position sensing requires adding one or external switches. The 25 mm rod and M20x1.5 thread provide excellent side-load capacity, though any stroke over 300 mm would require external guiding.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw allows you to mechanically shorten the nominal 155 mm stroke by up to 50 mm, providing an effective travel range of 105 to 155 mm. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.