Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX160-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10
The AirTAC SAIJ80X160-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 150-160 mm usable travel window, allowing you to dial back the nominal 160 mm stroke by up to 10 mm during commissioning.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Remember that the rear adjuster functions strictly as a travel stop to fine-tune end positions, not as a locking device to hold loads without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10 Is Used
Machine Changeover
Fine-tune the 150-160 mm stroke end position during product size changes without installing external physical stops.
Commissioning Calibration
Dial in the exact retract position during setup to compensate for mechanical tolerances across the fixture.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10 the Right Cylinder?
The adjustable 10 mm window is ideal for product changeovers or fine-tuning end stops without swapping cylinders. If you need true load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster cannot hold a load. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10 FAQ
The rear adjuster screw lets you shorten the effective travel from 160 mm down to 150 mm. It acts as a mechanical stop to tune the end position, but it does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.