Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX160-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S
The AirTAC SAIJ80X160-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 150 to 160 mm. It delivers a robust 2513 N pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks. The barrel features an extruded aluminum design with sensor grooves on both sides, and this unit includes a magnet for CMSE reed and DMSE electronic switches.
This model utilizes a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads with a G3/8 connection. The rear adjustment screw functions strictly as a mechanical stop to dial in the end position during commissioning; it does not lock or hold the load without continuous live air. For load-holding requirements, an external SAIL or BSAI locking cylinder is recommended.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S Is Used
Machine Changeover
Dial in the 150-160 mm travel window rapidly during product size transitions without replacing the cylinder.
End-Position Tuning
Fine-tune the retract stop during commissioning to perfect alignment and avoid hard mechanical crashes.
Heavy-Duty Positioning
Leverage the 2513 N pull force to move substantial pallets or fixtures while precisely trimming the end stop.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S the Right Cylinder?
Select this 80 mm bore cylinder when your application requires precise end-position tuning without adding external stops or swapping components during product changeovers. If your setup demands less force, stepping down to a 50 mm bore yields 825 N of pull force at 0.5 MPa, whereas moving up to a 100 mm bore provides 3681 N. This SAIJ variant uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. When replacing an ISO 15552 cylinder, match the 160 mm stroke, 10 mm adjustment, G3/8 PT ports, and the -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S FAQ
The rear adjuster acts as a mechanical stop that shortens the nominal 160 mm stroke by up to 10 mm, creating a 150-160 mm usable travel window. It only sets the end position and does not hold the load without live air pressure.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 513 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.