
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX170-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 170mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X170-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a broad usable travel window of 70-170 mm, allowing you to dial back the nominal 170 mm stroke by up to 100 mm during machine commissioning.
This variant is built with a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads with a G3/8 connection. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Remember that the rear adjuster functions purely as a travel stop to decelerate the piston, not as a lock, so the cylinder cannot hold a load without live air pressure.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX170-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position from 70 to 170 mm during production line changeovers without physically swapping out the actuator.
Use the 100 mm rear adjustment screw to fine-tune the retract stroke limit at machine commissioning, avoiding the need for external mechanical stops.
The massive 100 mm adjustment range is ideal for product changeovers, letting you set variable end-stops on the fly without swapping the cylinder or adding external stops. For any load-holding requirements without continuous air pressure, select the SAIL lock or BSAI clamp-lock series instead, as the SAIJ adjuster only restricts travel.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 170 mm stroke, 100 mm adjustment, PT G3/8 ports, and SUS304 rod material. Because the 170 mm stroke is relatively short, side-load stress is minimal, but you should still guide the load to protect the M20x1.5 rod thread. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles found in other series.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the 170 mm nominal stroke down to as little as 70 mm, providing a 100 mm tuning window to set the exact retract end-position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.