Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX180-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 180mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke180 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S
The AirTAC SAIJ80X180-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. A PT tapered port thread ensures a tight, reliable pneumatic connection.
This variant includes a SUS304 stainless steel rod (code B) for superior corrosion resistance and is equipped with a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides, and the adjustable stopper functions purely as a travel end-limit, not a load-holding lock.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S Is Used
Product Size Changeovers
Dial in the 150 to 180mm travel window on the fly to accommodate varying package dimensions without physically swapping cylinders on the line.
Machine Setup Fine-Tuning
Use the 30mm rear stopper screw to precisely set the retract end-position during initial commissioning, avoiding the need for external shims.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S the Right Cylinder?
The 30mm adjustment range is ideal for product size changeovers on a packaging line, allowing you to fine-tune the end position without swapping out the cylinder or adding external stops. For exact ISO 15552 replacement matching, verify the 180mm stroke, 30mm adjuster, PT G3/8 port, and the required -S magnet.
Because the stroke is 180mm, the M20x1.5 rod thread and 25mm rod diameter provide substantial rigidity, though any unsupported load should still use an external guide. Remember that the rear adjuster only sets the travel end; to hold a load securely without live air pressure, you must integrate an external rod lock or choose a SAIL or BSAI series cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S FAQ
At a maximum 1.0 MPa, it can deliver up to 513 kgf.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from its nominal 180mm down to 150mm. It only decelerates and sets the travel end; it does not lock or hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX180-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.