Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX185-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 185mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke185 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10
The AirTAC SAIJ80X185-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This variant incorporates a SUS304 stainless steel rod for superior corrosion resistance and ships with PT tapered port threads. The extruded aluminum barrel includes dual sensor grooves, allowing you to add CMSE reed or DMSE electronic switches if positioning feedback is later required.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10 Is Used
Machine Changeover
Dial in the exact 175-185mm retract position during product size changes without swapping out the entire cylinder or adding external stopper blocks.
End-Position Tuning
Fine-tune the final end-of-stroke deceleration point at commissioning to perfectly seat components, absorbing kinetic energy via the 36mm air cushion.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10 the Right Cylinder?
The adjustable stroke is perfect for machine setups requiring variable end-stops during product changeovers, rather than relying on a fixed-stroke SAI cylinder. When specifying an ISO 15552 replacement, match the 80mm bore, 185mm stroke, PT port thread, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For load-holding without pressure, consider an external rod lock or the SAIL series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10 FAQ
If pressure is increased to 0.7 MPa, the push force rises to 3518N.
The rear adjusting screw allows you to shorten the effective stroke by up to 10mm, creating a usable travel window of 175-185mm. This stopper fine-tunes the end position at commissioning but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX185-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.