Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX290-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 290mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke290 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10
The AirTAC SAIJ80X290-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 280-290 mm usable travel window, allowing you to dial back the nominal 290 mm stroke by up to 10 mm during commissioning without adding external stops.
This variant uses a SUS304 stainless steel rod (option B) for corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a travel stop to set the retract end-position and does not hold the load without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10 Is Used
Machine Setup Tuning
Dial in the exact 280-290 mm retract end-position during initial commissioning to perfectly align packaging folds without external stopper hardware.
Product Changeover
Quickly adjust the stroke by up to 10 mm on a packaging line when handling slightly different carton sizes, reducing downtime between production runs.
End-Stop Calibration
Fine-tune the final retract position on a heavy-duty assembly press, using the rear stopper to compensate for mechanical wear over time.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10 the Right Cylinder?
The 10 mm adjustment range is ideal for fine-tuning end positions during machine setup or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder. Because the 290 mm stroke is relatively long, an external guide is recommended to prevent excessive side-loading on the SUS304 rod.
For load-holding without continuous air pressure, this cylinder is insufficient as the rear adjuster and air cushions are not brakes; consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead. This model is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10 FAQ
The maximum thrust is 513 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the 290 mm nominal stroke by up to 10 mm, creating a 280-290 mm travel window. It acts as a mechanical stop to fine-tune the end position and is not a lock, meaning the cylinder requires live air to hold its load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX290-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.