
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX30-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 30mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X30-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 30 mm nominal stroke by up to 10 mm for a highly precise 20-30 mm usable travel window. This configuration features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for position sensing.
Because the adjuster acts purely as a mechanical stop at the retract end, it enables fine end-position tuning during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE solid-state switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on some other ISO profiles.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX30-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the retract end-stop during product size changes on a packaging line, trimming the 30 mm stroke down to 20 mm without installing external spacers.
Leverage the SUS304 stainless steel rod and 2268 N pull force to securely clamp workpieces in environments where moisture or minor splashing is present.
The adjustable rear stopper is ideal for product changeovers on a line, letting you trim the travel window down to 20 mm without swapping the cylinder for a fixed-stroke SAI model.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. Ensure your setup specifies PT tapered ports, a SUS304 stainless steel rod, and the -S magnet option. Note that the rear adjuster and air cushions only decelerate the load; they do not hold position without live air. For true load-holding without pressure, consider an AirTAC SAIL or BSAI model.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 513 kgf of push force.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 30 mm nominal stroke by up to 10 mm, creating a 20-30 mm usable travel window. It allows for precise end-position tuning at commissioning without swapping the cylinder, but it is a stop and not a lock, so it will not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.