Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX375-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 375mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke375 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10
The AirTAC SAIJ80X375-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 365-375 mm, letting you dial back the nominal 375 mm stroke by up to 10 mm.
This specific SKU is configured with a SUS304 stainless steel rod (code B) for superior corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Because the stroke is 375 mm, the 25 mm rod diameter provides rigidity, but an external guide is recommended to prevent excessive side-loading on long unsupported travels.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10 Is Used
Machine Setup & Changeover
Dial in the exact 365-375 mm retract position during line changeovers without physically swapping the cylinder or adding external shims.
Product Size Transitions
Accommodate varying package lengths on a conveyor by fine-tuning the stroke end position to match new product dimensions on the fly.
End-Stop Calibration
Use the 10 mm adjustment screw to precisely set the retract end-stop during commissioning, compensating for mechanical tolerance stack-up.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10 the Right Cylinder?
The 10 mm rear adjuster is ideal for fine-tuning the retract end position during commissioning or product changeover without adding external stops. For fixed travel without adjustment, use the standard SAI cylinder. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series. This model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw allows you to shorten the nominal 375 mm stroke by up to 10 mm, creating a usable travel window of 365 to 375 mm. It acts as a mechanical stop to fine-tune the end position and is not a locking device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX375-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.