Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX450-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke450 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10
The AirTAC SAIJ80X450-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. A notable configuration is its SUS304 stainless steel rod, which maximizes corrosion resistance in harsh or washdown environments.
With a 450mm nominal stroke and a 10mm adjustment range, this SKU provides a precise 440-450mm usable travel window. This allows operators to dial in the exact retract end-position at commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10 Is Used
End-Position Calibration
Dial in the exact 440-450mm retract distance during machine commissioning to perfect seating pressure without swapping physical components.
Product Changeover
Quickly adjust the stroke end-stop by up to 10mm on a packaging line to accommodate slightly different carton lengths on the fly.
Corrosive Actuation
Leverage the SUS304 stainless steel rod for heavy-duty pushing tasks in food processing or chemical environments where rust prevention is critical.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10 the Right Cylinder?
The adjustable stroke is selected over a fixed SAI model when a machine requires fine end-position tuning during setup or product changeover. Because the stroke is 450mm, an external guide should be used to support the load and prevent excessive side-loading on the M20x1.5 rod thread.
For an exact ISO 15552 replacement, match the 80mm bore, 450mm stroke, 10mm adjustment, PT tapered port thread, and standard non-magnet configuration. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. This SAIJ model supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10 FAQ
At the maximum 1.0 MPa pressure, it achieves a maximum push force of 513 kgf.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke from the nominal 450mm down to 440mm. It allows fine-tuning of the end position during setup but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.