Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX450-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke450 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30
The AirTAC SAIJ80X450-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that creates a usable travel window of 420 to 450 mm.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop for deceleration alongside the standard air cushions, meaning it will not hold a load without continuous air pressure. For load-holding requirements, consider the SAIL or BSAI series.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30 Is Used
Product Changeovers
Dial in the 420-450 mm stroke window during format changes without replacing the cylinder or adding external mechanical stops.
Assembly Line Tuning
Fine-tune the retract end-position during commissioning to synchronize multiple actuators across an automated assembly station.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30 the Right Cylinder?
The 30 mm adjustment range is ideal for product changeovers on a line, enabling variable end-stops without mechanical rebuilds.
To match this ISO 15552 interchangeable cylinder, confirm the 450 mm stroke, 30 mm adjustment, PT port thread, and standard mounting options (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 450 mm, the 25 mm rod should be paired with an external guide to prevent excessive side-loading on the unsupported piston. This SKU is configured without a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30 FAQ
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster screw allows you to shorten the effective travel from the 450 mm nominal stroke down to 420 mm. This stopper sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX450-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.