Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX60-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke60 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30
The AirTAC SAIJ80X60-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 30 to 60 mm usable travel window. This configuration includes a SUS304 stainless steel rod for superior corrosion resistance and PT tapered port threads.
You can fine-tune the retract end position during commissioning without swapping the cylinder or adding external stops. The rear adjuster acts strictly as a travel stop and works alongside variable air cushions at both ends, but it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30 Is Used
Precision Position Tuning
Dial in the exact retract distance within the 30 to 60 mm window during machine commissioning to achieve perfect alignment without external stopper hardware.
Product Size Changeover
Quickly adapt end-of-stroke positions on packaging lines when handling different product heights, utilizing the 30 mm adjustment range for rapid format changes.
Corrosive Assembly Lines
Leverage the SUS304 stainless steel rod in humid or washdown manufacturing environments where standard carbon steel rods would degrade over time.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30 the Right Cylinder?
The adjustable stroke is perfect for machine setups requiring variable end stops or product-size changeovers, giving you a 30 mm trimming range on a 60 mm nominal stroke. Since this is an adjustable-stroke model, it uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
To match this exact replacement, verify the 80 mm bore, 60 mm nominal stroke, 30 mm adjustment range, PT port threads, and the SUS304 stainless steel rod material. Note that this unit lacks a magnet, so it is not compatible with CMSE or DMSE sensors without a model suffix change.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm from the 60 mm nominal length, creating a 30 to 60 mm travel window. It functions as a mechanical stop and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX60-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.