Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX600-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S
The AirTAC SAIJ80X600-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel back by up to 30 mm. This creates a usable 570-600 mm stroke window, letting you dial in the exact end position during commissioning without swapping hardware.
Equipped with a SUS304 stainless steel rod and a magnet for position sensing, this unit accepts AirTAC CMSE reed and DMSE electronic switches. The extruded aluminum barrel includes sensor grooves on both sides, and the rear stopper simply sets the travel end. It does not lock the load without live air; use a SAIL or BSAI cylinder for pneumatic load-holding.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S Is Used
Machine Changeover
Fine-tune the 570-600 mm travel end-stop to handle different product sizes on the same line without changing cylinders.
End-Position Tuning
Dial in the exact retract position during commissioning to meet tight tolerances without adding external mechanical stops.
Conveyor Diverter
Adjust the retract distance on the fly to accommodate varying package lengths moving down a material handling belt.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S the Right Cylinder?
Choose this adjustable model over a fixed SAI when your setup requires fine end-tuning or frequent product-size changeovers. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Because the 600 mm stroke is long, the unsupported load increases lateral stress on the 25 mm rod and M20x1.5 thread. You must use an external guide to prevent side-load damage. For a true ISO 15552 replacement, match the 80 mm bore, 600 mm stroke, 30 mm adjuster, PT tapered ports, and the -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S FAQ
The rear adjuster acts as a mechanical stop, allowing you to shorten the 600 mm nominal stroke by up to 30 mm. This provides a usable travel window of 570-600 mm. The adjuster only sets the end position; it does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX600-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.