Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX70-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 70mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke70 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10
It features a SUS304 stainless steel rod and PT tapered ports. By turning the rear screw, you achieve a usable travel window of 60-70mm, allowing precise end-position tuning without swapping hardware.
This adjustable-stroke design is tailored for machine setups requiring exact physical stops during commissioning or product changeover. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, adding an -S variant enables CMSE reed or DMSE electronic solid-state switches for position feedback.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10 Is Used
End-Position Calibration
Dial in the exact 60-70mm travel distance during machine commissioning to perfect part seating without machining new hard stops.
Product Changeover
Quickly adjust the rear stopper by up to 10mm to accommodate slight variations in product sizes on a fast-paced packaging line.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10 the Right Cylinder?
The 10mm adjustment window is perfect for dialing in a 60-70mm stroke exactly at commissioning, avoiding the need to bolt on external stops or buy a custom fixed-stroke SAI cylinder.
For any stroke at or above 300mm, an external guide is recommended to manage side load, though this 70mm stroke is well within safe limits for the 25mm rod. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series. This model is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10 FAQ
At 0.7 MPa, the push force increases to 3518N.
The rear adjuster screw acts as a mechanical stop, allowing you to trim the nominal 70mm stroke back by up to 10mm. This creates a usable travel window of 60-70mm for fine-tuning at commissioning, but it does not lock the position without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX70-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.