Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX800-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke800 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S
The AirTAC SAIJ80X800-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 790 to 800 mm. The integrated magnet supports AirTAC CMSE reed and DMSE electronic sensors via the dual-side barrel grooves.
This model features a SUS304 stainless steel rod for corrosion resistance and uses PT tapered port threads. The rear adjuster acts purely as a travel stop to fine-tune the retract position without adding external physical stops. It is not a locking device; the cylinder relies on live air pressure to hold its load, so for true fail-safe load holding, consider SAIL or BSAI variants instead.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S Is Used
Long-Stroke Machine Setup
Dial in the exact 790-800 mm retract end-stop during initial commissioning of large equipment without installing secondary external physical stops.
Product Size Changeover
Quickly adapt the stroke length on a packaging line when product dimensions change, using the rear screw to fine-tune the retraction point.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S the Right Cylinder?
The 10 mm rear adjustment screw lets you dial in the exact retract end-stop during machine setup or product changeover without physically swapping the cylinder. To replace an ISO 15552 cylinder, match the 80 mm bore, 800 mm stroke, 10 mm adjustment, PT G3/8 ports, and the -S magnet requirement.
Because the 800 mm stroke is substantial, the 25 mm rod diameter and M20x1.5 rod thread provide robust support, but an external guide is strongly recommended to prevent excessive side-loading on the long unsupported piston rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S FAQ
At the maximum 1.0 MPa pressure, the push force reaches 4523 N.
The rear adjusting screw acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, creating a 790 to 800 mm usable travel window. It fine-tunes the retract end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX800-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.