verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X155-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke155 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$159.34 $166.84Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75

The AirTAC SAIJ80X155-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 155 mm stroke and a 75 mm adjustment range, it provides a wide usable travel window of 80 to 155 mm. This allows you to dial in the exact retract end-position during commissioning without swapping out the barrel.

Equipped with a 25 mm carbon steel rod and an M20x1.5 thread, it handles substantial side loads, though long unsupported strokes still require external guide rails. The extruded aluminum barrel includes sensor grooves on both sides for fitting CMSE reed or DMSE electronic switches if needed. This adjustable model utilizes a focused mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80X155-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75 Is Used

settings_input_component

Variable End-Stop Positioning

Ideal for assembly stations that need to change the retract distance on the fly, utilizing the 80-155 mm travel window to accommodate different part heights without changing cylinders.

factory

Machine Changeover

Speeds up product line changeovers by allowing operators to fine-tune the end position via the rear screw rather than adding physical external spacers or stops.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75 the Right Cylinder?

The extensive 75 mm adjustment range is ideal for machinery that frequently handles multiple product sizes, acting as a variable end-stop. Remember that the rear adjuster is strictly a travel stop, not a locking device; it cannot hold a load without continuous air pressure. For true fail-safe load holding, consider the SAIL or BSAI series instead.

When replacing an ISO 15552 cylinder, match the 80 mm bore, 155 mm stroke, 75 mm adjustment, PT tapered port thread, and mounting interface. Because the 155 mm stroke is under the 300 mm threshold, standard side-loading concerns are minimized, but the 25 mm rod still provides excellent rigidity for standard dynamics.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75 FAQ

It features a rear adjusting screw that lets you shorten the effective stroke by up to 75 mm. This creates a usable travel window between 80 and 155 mm, allowing precise retract end-position tuning without replacing the cylinder.

At the maximum 1.0 MPa pressure, the push force reaches 4523 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X155-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ80X155-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.