
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X280-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 280mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X280-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster.
This 80mm bore actuator uses a G3/8 port and a 25mm carbon steel rod with an M20x1.5 thread, offering high rigidity against side loads. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, while omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X280-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 240-280mm travel window during commissioning to dial in exact retract positions without machining new hard stops.
Adjust the stroke on the fly to accommodate different package sizes on a packaging line, ensuring precise mechanical positioning.
Trim up to 40mm off the nominal stroke to compensate for mechanical wear or slight misalignment over the machine's lifecycle.
Choose this 80mm bore model when your application requires substantial force—stepping down to a 63mm bore yields 2805N at 0.9 MPa, while stepping up to 100mm bore provides 7068N. The adjustable stroke is ideal for product changeovers, allowing you to fine-tune the retract end position without swapping the cylinder or adding external stops.
Because the 280mm stroke is moderately long, ensure an external guide supports the load to prevent rod binding. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ cannot hold a load without live air, so for fail-safe holding, consider an AirTAC SAIL or BSAI cylinder. For ISO 15552 replacement, match the 80x280 dimensions, 40mm adjustment, PT tapered ports, and the required mounting interface.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from 280mm down to 240mm. It only sets the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.