
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 45mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X45-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 45 mm travel but incorporates a 40 mm adjustment screw, creating a highly versatile 5 to 45 mm usable stroke window for exact end-position tuning during commissioning.
This pneumatic actuator utilizes a robust 25 mm carbon steel rod and an M20x1.5 thread to handle substantial side loads, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster functions strictly as a mechanical stop to set the retract distance and relies on the integrated variable air cushions for end-of-stroke deceleration, meaning it will not hold a load safely without continuous air pressure.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X45-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 5 to 45 mm to securely clamp parts of varying widths on the same fixture without changing tooling.
Fine-tune the final end-position during initial machine build to achieve perfect alignment, absorbing mechanical tolerances via the rear stopper screw.
Quickly adapt the stroke on packaging lines to accommodate different carton or product lengths, minimizing downtime between production runs.
Select this 80 mm bore actuator when your equipment requires variable end-stops for rapid product-size changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. If your setup demands less thrust, stepping down to a 63 mm bore yields 1559 N at 0.5 MPa; conversely, moving up to a 100 mm bore provides 3927 N for heavier payloads. Because the total travel is relatively short at 45 mm, external rod guidance is less critical here than on longer strokes, though the 25 mm rod still provides excellent rigidity.
To match this ISO 15552 interchangeable cylinder for a replacement, confirm the 80 mm bore, 45 mm base stroke, up to 40 mm adjustment range, PT tapered port thread, and standard carbon steel rod. Note that this model lacks a magnet, so it requires external sensing if position detection is needed. For load-holding requirements without live air pressure, this standard adjuster is insufficient and you should pivot to an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers a maximum push force of 513 kgf.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective stroke back by up to 40 mm. This creates a usable travel window of 5 to 45 mm, allowing you to set the exact end-position at commissioning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.