
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X65-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 65mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X65-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating an external adjusting screw, this model allows you to trim the effective stroke by up to 10mm, creating a precise 55-65mm usable travel window for exact end-position tuning.
Because the adjuster acts purely as a mechanical stop on the retract end, it does not lock the load without live air pressure. The extruded aluminum barrel features dual sensor grooves for CMSE or DMSE switches, and the mounting interface supports a specific subset of brackets: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X65-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55-65mm retract position during product line changeovers using the rear screw, eliminating the need to fabricate custom external stopper blocks.
Achieve precise end-of-stroke tuning for high-force clamping or pressing tasks, trimming up to 10mm of travel to accommodate varying workpiece tolerances.
The adjustable stroke is ideal for machine setups requiring variable end stops or product-size changeovers, allowing you to fine-tune the 55-65mm travel window at commissioning without swapping out the entire cylinder. For load-holding without continuous live air, this cylinder is insufficient; you should explore an AirTAC SAIL or BSAI model instead.
When replacing an ISO 15552 cylinder, match the 80mm bore, 65mm nominal stroke, 10mm adjustment range, G3/8 PT port thread, and the specific mounting bracket. Since this configuration uses a standard carbon steel rod and lacks a magnet, position-sensing switches must be purchased separately if needed.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the 65mm nominal stroke by up to 10mm, providing a usable travel window of 55-65mm. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.