
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X700-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X700-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 660 to 700 mm by allowing you to dial back the nominal 700 mm stroke by up to 40 mm.
This adjustable design eliminates the need to swap cylinders or add external stops during machine commissioning or product changeovers. It features a carbon steel piston rod with an M20x1.5 thread, sized to handle significant side loads, though the lengthy 700 mm stroke still requires an external guide to prevent rod deflection. The extruded aluminum barrel includes sensor grooves on both sides, and pneumatic routing uses a PT G3/8 port.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X700-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 660-700 mm window during machine commissioning without swapping out the entire cylinder.
Quickly adapt the stroke end-point on packaging lines when processing different product lengths, using the 40 mm adjustment range for fast transitions.
The SAIJ80X700-40 is selected specifically when you need precise end-position tuning at setup, using the 40 mm rear adjuster to fine-tune the retract stroke without physically remounting the cylinder.
Because the 700 mm stroke is quite long, an external guide is highly recommended to manage side loads and prevent rod bending. Keep in mind the rear adjuster acts only as a travel stop and relies on air cushions for deceleration; it does not hold the load without live air pressure. For true load-holding without continuous pressure, consider an AirTAC SAIL (air-released lock) or BSAI (clamp-lock) cylinder. This model uses a PT G3/8 port, carbon steel rod, and supports mounting options limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel from the nominal 700 mm down to 660 mm. This stopper fine-tunes the end position at commissioning but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.