
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X700-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X700-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly versatile 625 to 700 mm usable stroke window, letting you dial in the exact retract position during commissioning without swapping out the entire unit or adding bulky external stops.
Equipped with a 25 mm carbon steel rod and an M20x1.5 thread, this 80 mm bore unit provides robust resistance to side loading, though a 700 mm stroke still necessitates an external guide to prevent rod deflection. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X700-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for large press feeds or heavy material handling where the 625-700 mm travel window allows operators to precisely trim the retract position to match varying material lengths.
Perfect for machine setup phases where the 75 mm rear adjuster lets you fine-tune the end-of-stroke position to absorb accumulated mechanical tolerances across a long 700 mm travel distance.
Enables quick adjustment of the retract stop on packaging or sorting lines when switching between different product sizes, eliminating the need to physically swap cylinders for new stroke requirements.
The 75 mm adjustment range is particularly valuable for long-stroke setups where manufacturing tolerances accumulate, allowing you to fine-tune the retract end-stop on the fly instead of relying on a fixed-stroke SAI cylinder. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air; for true drop-prevention, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 700 mm nominal stroke, 75 mm adjustment, PT tapered port thread, and the required mounting bracket. Because the stroke is 700 mm, always incorporate an external guide rail to manage side loads and prevent rod bending over the extended travel distance.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjusting screw acts as a mechanical stop that lets you shorten the nominal 700 mm stroke by up to 75 mm, resulting in a usable travel window of 625 to 700 mm. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.