
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 45 to 75 mm, allowing you to dial in the exact retract position during commissioning without adding external stops.
This 80 mm bore unit uses a G3/8 port and a robust 25 mm carbon steel rod with an M20x1.5 thread, offering high resistance to side loads. The extruded aluminum barrel includes sensor grooves on both sides, and the adjustable rear stopper acts purely as a travel end-deceleration device, not a load-holding lock.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-75 mm retract position during product size changes on a packaging line without swapping the cylinder.
Fine-tune the final end-stop during commissioning to absorb mechanical tolerances and achieve exact placement.
Use the rear adjuster screw to set precise retract distances for varying assembly tool heights.
Choose this adjustable model over a fixed SAI when your application requires variable end-stops or frequent product changeovers. Because the 75 mm nominal stroke is short, side-load stress is minimal, but always guide external loads. To match this ISO 15552 replacement, specify the 80 mm bore, 75 mm stroke, 30 mm adjustment, PT port threads, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. The standard configuration lacks a magnet; add an -S suffix for CMSE reed or DMSE electronic sensor compatibility. Remember that a plain SAIJ does not hold loads without live air—use SAIL or BSAI for locking needs.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 513 kgf.
The rear adjuster screw lets you shorten the 75 mm nominal stroke by up to 30 mm, creating a usable travel window of 45 to 75 mm. The adjuster acts as a mechanical stop to fine-tune the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.