
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 75 mm travel by up to 40 mm. This creates a highly versatile 35-75 mm usable stroke window, perfect for fine-tuning end positions during commissioning without swapping hardware.
This extruded aluminum profile cylinder features a 25 mm carbon steel piston rod and a G3/8 port. It supports variable air cushions at both ends to manage kinetic energy. The rear adjuster functions strictly as a mechanical stop to set the retract position, so it cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract distance within the 35-75 mm window to accommodate varying package sizes on the same line without changing the cylinder.
Dial in the exact end-stop during machine commissioning to perfect a pressing or forming operation, avoiding the need for external shims.
Set distinct stroke lengths for different operational cycles on automated equipment using the rear mechanical adjuster.
The SAIJ80X75-40 is selected specifically when a 35-75 mm travel window is needed, allowing precise variable end-stops for product changeovers on a packaging line. To match this ISO 15552 replacement exactly, specify the 75 mm stroke, 40 mm adjustment, PT port thread, and your required mounting bracket from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the nominal stroke is under 300 mm, external side-load guides are less critical here, though the 25 mm rod handles standard loads well.
If you need position feedback, note this specific SKU omits the magnet option. An -S suffix variant is required to mount AirTAC CMSE reed or DMSE electronic solid-state sensors into the dual-side sensor grooves.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the 75 mm nominal stroke by up to 40 mm, creating a usable travel window of 35 to 75 mm. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.