
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel end during commissioning. With a nominal 75 mm stroke and a 50 mm adjustment range, it provides a highly flexible usable travel window of 25 to 75 mm without requiring external stops.
This model features a 25 mm carbon steel piston rod with an M20x1.5 thread, providing excellent rigidity against side loads, while the extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch placement. It uses a PT tapered port size of G3/8 and includes adjustable air cushions at both ends to smooth out the 30-800 mm/s operating speeds. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true drop protection, a SAIL or BSAI series cylinder is required.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position during initial commissioning using the 25-75 mm travel window, eliminating the need to machine custom spacer collars.
Quickly adjust the rear stopper by up to 50 mm when running a different product size on the line, minimizing downtime between production batches.
Set precise retract positions for clamping or pressing tasks that require flexible travel limits within a compact 75 mm overall stroke.
Choose this 80 mm bore cylinder when your application requires substantial force—such as 4523 N at 0.9 MPa—and the ability to dial in the exact end-of-stroke position on the fly. The 50 mm adjustment range is particularly useful for product changeovers on a line, allowing operators to reposition the stop quickly instead of swapping out the entire cylinder for a fixed-stroke SAI variant.
Because this is an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders of the same bore size. When replacing a unit, verify the 75 mm stroke, 50 mm adjustment requirement, G3/8 PT port thread, and the specific mounting accessory set used (Basic, FA, LB, TC, FTC, TCM1, or TCM2, as SAIJ omits FB, CA, CB, and CR mounts). Note that this model does not include a magnet for sensors; adding the -S option enables compatibility with AirTAC CMSE reed and DMSE electronic switches.
Quick checklist
The maximum thrust at 1.0 MPa is 513 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its nominal 75 mm down to as little as 25 mm. It only sets the travel end and provides deceleration alongside the air cushion; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.